Site Forums »  General Forum » Recalls & Service Bulletins         Display posts for: logout login  register register  search search  help help

Site Forums
post new topic
Subscribe This Forum Subscribe to this forum 
Topic Poster Post Views Last Updated
Showing results 1 - 20 of 76    Max Per Page
1 2 3 4  
new messages news Sticky: All models from 1999 up to2005

 mymc 8 1829 Wednesday, June 04, 2008
09:11:45 AM
by: h20_skidog
HOT Topic general 2002 Torsion axle replacement
UFP bulletin #02-UFPSB001 If any trailer has significantly less (more than 1") fender clearance when compared to the other trailer tire(s) the axle must be replaced.... 		mymc 11 1227 Sunday, August 08, 2010
10:17:31 PM
by: jeffm1515
Topic is Active - New Messages news '05 & '06 Perfect Pass Performance

SERVICE BULLETIN

mymc

1 730 Friday, July 23, 2010
01:53:02 AM
by: Drewp775
Topic is Active - New Messages general LY6 Raw Water Cooling System
2007 LY6 Engine Prior to Serial Number 130833

The LY6 engine, introduced in 2007, requires some modifications to the cooling system, when cooled by raw water, to make it less susceptible to overheating conditions. The procedure involves ...

mymc 1 318 Sunday, April 11, 2010
05:16:37 AM
by: michelm
Topic is Active - New Messages general Prostar 214 Rudder Arm Recall??
Can anyone confirm whether or not this recall is for real? Apparently, the rudder arm can rub against the fuel tank in certain circumstances. Please share, thanks!! http://www.totalrecallinfo.com/freerecalls.php?id=12619 July 14---Mastercraft Boat Co. recalls ProStar 214/ X14 Direct Dr... 		mjsmith711 1 176 Wednesday, September 02, 2009
10:37:52 AM
by: mymc
Topic is Active - New Messages general 1999 & 2000 LTR belt wear
Some customers are experiencing belt wear (shredding) on some LTR engines through serial number IC972971. In most instances the situation is corrected by the installation of a new "shouldered" design water pump pulley. Kit #81496005 should alleviate most problems. In a very few number of cases the s... 		mymc 7 590 Friday, June 12, 2009
12:09:42 PM
by: Jason99T/A
Topic is Active - No Messages news Fuel Sender 2008 and 2009 Models
No.2008.DEC01.SB-011 CONDITION: It has been determined that the fuel sending unit provides inaccurate readings throughout the entire range. In order to correct this situation, fuel sending unit strips should be replaced. THIS RECALL EFFECTS ALL 2008 & 2009 MODEL BOATS THROUGH SERIAL NUMBER MB... 		mymc 0 268 Monday, December 01, 2008
03:17:59 PM
by: mymc
Topic is Active - No Messages general All 2008 MasterCraft Models with MCX/CATS
2008.JUL08.SB-006

SUBJECT: Stainless Steel Exhaust Elbows with Restricted Water Flow

MODEL(S): All 2008 MasterCraft Models with MCX Engines

... 		mymc 0 563 Tuesday, July 08, 2008
03:45:26 PM
by: mymc
Topic is Active - No Messages general ALL 2007 & 2008 L-18's

It has been determined that the 8.1L Indmar engines installed in 2007 and 2008 boat models have an ECM calibration that does not allow the engine to function as designed or required to ensure expected performance and long-term durability. In Indmar’s...

mymc 0 348 Friday, May 23, 2008
01:16:42 PM
by: mymc
Topic is Active - No Messages general Stainless Exhaust Elbows Restricted Flow
Units Affected: 2008 Model MasterCraft Catalyst Motors from S/N 144278-146784

We have had several reports from the field of the 3 ½” exhaust hose connected to the stainless steel elbow at the rear of the exhaust manifold melting through. The caus...

mymc 0 200 Monday, May 12, 2008
09:43:50 AM
by: mymc
Topic is Active - New Messages general Reverse rotation MasterCraft boats
First of all to all of you doubters out there yes they do exist! EARLY in 2003 MasterCraft tried using RH rotation props. These rolled out the door on ALL V-Drives at the very beginning of the model year. Subsequent testing found that the "reverse" rotation negatively affected the handling and wake... 		mymc 6 376 Monday, May 12, 2008
09:38:55 AM
by: mymc
Topic is Active - No Messages general 2008 MariStar & X-Star temp gauge

No.2007.OCT22.SB-010

SUBJECT: Temperature Gauge

MODEL(S): 2008 MariStars and X-Stars from

start of production through MBCGSEC0I708

CONDITION:

mymc 0 339 Monday, October 29, 2007
03:46:38 PM
by: mymc
Topic is Active - No Messages general VDIG lock info

No. 2007.OCT05.SA-017

SUBJECT: VDIG Lock-up

MODEL: All 2008 models equipped with VDIG

CONDITION: Some customers have r...

mymc 0 361 Monday, October 08, 2007
03:19:04 PM
by: mymc
Topic is Active - No Messages general 2007 RTP-1 & MCX Hose Failure

No.2007.JUN25.SB-003

A number of issues regarding the 81845010 J-hose that connects the water circulating pump to the thermostat housing on certain 2007 model RTP-1 and MCX engines have been reported. ...

mymc 0 400 Tuesday, June 26, 2007
11:30:54 AM
by: mymc
HOT Topic general Steering Cable All 2004 up to MBCA2CJ0H304

MasterCraft and Teleflex Morse, Inc., (“Teleflex”) have determined that a steering cable manufactured by Teleflex, which is utilized in the rack-and-pinion steering system on the model year 2004 boats(i.e., the ProStar 190, 197, ...

mymc 18 3013 Monday, June 18, 2007
08:29:32 AM
by: mymc
Topic is Active - No Messages general Trailer jack bushing No.2007.JUN08.SB-002

No.2007.JUN08.SB-002

SUBJECT: Trailer Jack Bushings

MODEL(S): Trailers Manufactured between Sept. 2005 and Sept. 2006

CONDITION:

 		mymc 0 338 Friday, June 08, 2007
08:29:12 AM
by: mymc
Topic is Active - No Messages general Crusader Awareness update Water in Bilge

In efforts to continue providing the most reliable marine engine, and maintaining the longevity of the engine, Crusader finds it necessary to inform d...

mymc 0 340 Wednesday, February 21, 2007
08:51:46 AM
by: mymc
Topic is Active - No Messages general 2005-2007 6.0 Crusader

Crusader Engines has recognized the need to provide some enhancements to the cooling system on Mastercraft 6.0L engines,model # 07-600V-xx. Some, or all of these enhancements are applicable to these applications for 2005-2007 model year engines...

mymc 0 301 Wednesday, February 21, 2007
08:45:13 AM
by: mymc
HOT Topic general X10 & 210 with Perfect Pass
As many of you have written and posted there seems so be an issue with this model and its ability to hold speed in rough or choppy water using Perfect Pass. The problem seems to be most evident in rollers or chop and here is why: If you look at where the paddle wheel is mounted it is positioned far... 		mymc 12 802 Tuesday, June 06, 2006
08:19:14 AM
by: mymc
Topic is Active - New Messages general Rudder recall or just replacement?
Ok, so i have seen that from 03-05 Mastercraft has been using the same rudder shape.  I was reading on wakeworld how a dealer changed out some ones 05 rudder to the new shape that they are using on the 06 boats now.  I guess this new shape makes the boat handle better.  So my question... 		wakefunX-2 3 541 Tuesday, June 06, 2006
07:51:48 AM
by: mymc
Topic is Active - New Messages general Another option for a fix
I had the same problem with a 2002 X-9. The ballast pumps would stick, and then finally they jammed. The dealer did somthing, I think they replaced the wiring harness, at least thats what they said. That seemed to work for a while, then the problem came back. I went searching on the internet for ... 		JerryW 6 612 Monday, May 15, 2006
08:49:02 AM
by: mymc
1 2 3 4

Whos Online?
There are currently 10 member(s).
Hop to:
guest you have limit capabilities as guest. Please login / register